How to Anchor a Pergola on Pavers — Step by Step 2026
Pavers can be anchored but require concrete pads underneath, not just paver-only anchors. The exact method we use.
Anchoring on pavers is the second-most common gazebo install scenario after concrete patios. Done wrong, the pergola lifts in wind. Done right, it lasts forever. Here is the method.
Quick Comparison
| Pick | Best For | Approx Price |
|---|---|---|
| Concrete Anchor Kit | Sabre Concrete Anchor Kit for Gazebos | $30-$50 |
| Quick-Set Concrete | Quick-Set Concrete Mix for Paver Anchoring | $10-$20 per bag |
Our Picks
Why Pavers Alone Won't Hold
Pavers sit on a sand bed. Anchors driven only into pavers pull out under wind load. The fix: pour concrete pads beneath the four pergola legs.
Step 1: Mark Locations
Position the pergola, mark the four leg locations on the pavers. Move pergola aside.
Step 2: Remove Pavers
Pry up the pavers at each marked location (1 paver per leg). Set aside.
Step 3: Pour Concrete
Mix Quick-Set concrete in each hole. Smooth flush with paver level. Embed J-bolts or wedge-anchor positions while wet.
Step 4: Wait 24 Hours
Concrete cures 24-48 hours. Reset pavers around the cured pads.
Step 5: Install Anchors and Pergola
Drill into cured concrete pads, install wedge anchors, position pergola, torque to 45 ft-lbs.
Buying a gazebo, pergola, or playset? Book installation or get a free quote. Same-day available across California.
Frequently Asked Questions
Can I skip the concrete pads?
No — pavers alone will not hold a pergola in California wind.
How long does this take?
Day 1: pour pads (1 hour). Wait 24-48 hours. Day 2: install pergola (2-3 hours).
Cost?
Concrete pads + anchors: $80-$150. Plus your pergola.
Complete Your Backyard
Need a Pro in California?
Licensed, insured, background-checked handymen. 4.9☆ rated. Same-day available.
Book Online Now →