Drywall is probably one of the last things on your mind when it comes to your home. However, unsightly blemishes such as holes, cracks, or stains can be impossible to ignore. So, what can you do to address your home’s damaged drywall? To help solve this problem, we reached out to expert, from Los Angeles, CA, to Honolulu, HI, for their best tips to repair cracks in drywall and remove signs of daily wear and tear. Read on to find the solution that works best for you.

1) Watch out for signs of water leaks

When your drywall is brittle, discolored, or wet, this is a sign you need to repair or replace the drywall. This may be due to leaks from faulty plumbing, a leaky roof, or moisture trapped underneath the house. Be sure to get it checked by a professional before attempting any drywall repairs. – Zomg The Handyman

2) Cover damaged drywall with decorative tiles

Rather than simply repairing your drywall, why not create a beautiful 3D wall? Our tiles glue over damaged drywall and are DIY friendly. There are hundreds of options for covering damaged drywall. – Decorative Ceiling Tiles

3) Sand the wall after repairing it

After filling or repairing the hole, sand an area three to four times as big as your hole was. Likewise, you should paint an area two to three times larger than the sanded area. This will remove textural imperfections and help blend your repair into the wall. – Buzy

4) Test before you paint

Before you begin to repair drywall damage, carefully clean and sand the area you’ll be working in, covering any furniture and electronics in the space. Once you have repaired the hole and it’s dry, you’ll then want to choose the correct texture and paint. Keep in mind that you can always test it in an area that’s not as noticeable. You may need to sand the area a few times until the texture is correct before you paint. – SERVEPRO of Central Honolulu

5) Use a repair kit to fix wall damage

Fix small to medium-sized holes in drywall or plaster with the Marshalltown Wall Repair Patch Kit. The no-rust aluminum plate provides rigid backing, while the fiberglass, self-adhesive mesh eliminates the need to pre-plaster. – Marshalltown